optima turkus

Section air handling unit – execution for swimming pools.

OPTIMA TURKUS air handling units (for swimming pools) are designed to guarantee thermal – humidity comfort in very humid rooms and facilities.

The air handling units supply the required amounts of air to ventilated rooms, dry the ambient air and allow for minimizing the consumption of energy thanks to the application of heat recovery. Due to the processing of very humid air and often polluted with chemicals applied in the swimming pool technology, the units feature special technical solutions.

An additional asset of the OPTIMA TURKUS are the control systems providing precise control of the operation of the unit, depending on external conditions and on the intensity of use of the building, thanks to which the best and the most economic operation mode can be selected.

INTENDED PURPOSE

Very humid rooms: swimming pools, indoor pools, aquaparks.

There is a possibility of configuring the dimensions, the size and the functions to adapt the air handling units to the individual requirements of each building and room requiring a ventilation – air conditioning system.

FUNCTIONS

Ventilation, Heating, Cooling, Humidification, Drying

TYPE SERIES

  • Capacity: 1 000 ÷ 65 000 m3/h (0,27 ÷ 18,05 m3/s)
  • 11 size types – to be further modified according to individual requirements
  • Supply units, exhaust units, supply-exhaust units
  • At special request, we can offer higher-performance units

HEAT RECOVERY TYPES

  • Cross-flow exchanger
  • Countercurrent cross-flow exchanger
  • Run-around glicol systems
  • Heat pipe
  • Heat pump/Cooling unit
  • Mixing chamber – recirculation
  • Combination of any of the recovery modes

SPECIFICATION

  • Highest quality subassemblies and elements intended for swimming pools, supplied by European manufacturers exclusively.
  • Effective collection of humidity in the swimming pool hall: homogeneity of air, protection of building structure through the elimination of misting of such elements as windows, the option of heating and possible cooling of the swimming pool hall, maintaining the correct parameters of supplied air.
  • Stainless steel drip trays.
  • Cable grommets guaranteeing proper tightness.
  • Inspection windows and lamps facilitating the control of cleanness inside the air handling unit without the need to stop or open the device.
  • Apart from special technical solutions, functional sections in the unit can optimally condition the supply air.
  • There is a possibility of furnishing the unit with a refrigerant/water heat exchanger, which can be used to heat up swimming pool water or tap water when the ventilation system has energy surplus.

 

Back to products list